Quote:
Originally Posted by M_Bimmer
bk_mike, I've been looking at my options.
The G11/G12 750 front calipers support the F02 B7's disc size of 374x36, but I've found no data that states that the G11/G12 front caliper will sit w/o shims to center to the F02 B7's brake disc.
The F02 B7's caliper is stamped with "60/36/374".
The G12 750's caliper is stamped with "4x40/374/36" (pre-LCI and LCI have different caliper numbers)
...where the first number is the cylinder size, so not too worried about that number....it's the offset of the brake caliper relative to the brake disc.
The G12 B7 calipers and discs are larger at 395x36 and better looking, and since I already own this set, I could check to see if it will fit on the F02 B7....
Oh the options.
|
Yep you would need the 4mm shims to center the G11 750 calipers. I have the OEM B7 setup you have on your F02 on my F10. It bolts right up but even cleaned and painted its not as pretty as the G11. I have a G11 setup I might swap on, or maybe I will sell it, not decided yet.