View Single Post
      03-29-2024, 10:35 AM   #6
M_Bimmer
Captain
M_Bimmer's Avatar
603
Rep
854
Posts

Drives: G12 B7, G07 XB7, F02 B7, 991.1
Join Date: May 2020
Location: Left Coast

iTrader: (0)

...what could help is if you could zoom your picture out, and show where the wiring harness comes out from the dashboard....

Are there other unaccounted for items missing from the dashboard?

I do see that your HVAC controller (A95) is missing, the center console emergency flasher button is missing, and the door lock button is missing from in your picture.....so you have connectors accounted for these items?

FYI, a 0.75mm solid red wire (no stripe), a 0.75mm solid brown wire (no stripe) and a 0.5mm white wire (no stripe) are usually assigned to a LIN bus. But your 0.75mm red wire looks like it has a stripe on it, which means its a power wire from the fuse box.

A twisted pair of 0.35mm wire pair (green + orange/green) are reserved for the K-CAN bus.

So we need to find a missing electrical item besides your start/stop button....


Note: the 10-conductor connector below is used throughout your vehicle on multiple connections.
Attached Images
 
Appreciate 0