[M_Bimmer]

Originally Posted by addy27

The in tank fuel pump ALPINA B6 specific can be found here: Its not common so might have to get it from the dealer IF at all it fits into the B7/F01/F02 Gas tank.
https://www.realoem.com/bmw/enUS/sho...diagId=16_1057

This pump is probably very similar to the M5/M6 in that it is a 3-phase pump. So the corresponding EKPM module can be bought pretty cheap from fleabay and then programmed to fool into thinking its in a B6:
https://www.realoem.com/bmw/enUS/sho...diagId=16_0943

And last are the airboxes and nostrils which I have.. the only piece I dont have is one of the inlet scoops (either #2 or #6 in this diagram):
https://www.realoem.com/bmw/enUS/sho...diagId=13_1595

addy27 The fuel tank sender pump for the F06 also has an additional item, a temp sensor, leak diagnosis module (P/N 1613733358), $179.91, which would be required for the fuel pump control unit.

This item I've listed might put this Mod on hold...as I look into other items that may be required to make the flash "work".....But if the price is right, for all the plastic tubing you do have, and the air boxes (be nice if they have the filters already), I'd probably go ahead and pull the trigger and buy the package...unless you want to put it up for sale in the classified section of the forum....if it's already there, mind sending me a link?

Cheers!