Quote:
Originally Posted by Alex@Alpine
I can code the new 7 series no problem. It's minimal options such as folding mirrors with key, windows up with key, removal of seat belt chimes, amber delete, removal of legal disclaimers, rolls Royce gong (the new one.)
DVD in motion is only for clients local to Los Angeles & New York (will not do remote.)
|
Most of the functions have the same names; one exception being enabling closing of trunk with KeyFOB.
I was able to enable Video in Motion on ID4 for HU_NBT2, but only up to 63 kmh on ID5. How did you figure out DVD in motion? Is it with hardware or just coding?
Among others, I can do the following:
Enable/Disable Horn when locking vehicle with engine running
Fold mirrors/ roll up windows with keyfob and CA
Remove Mirror / Window Initiation Delay with CA and KeyFOB
Remember Auto Start Stop Setting when shutdown
Unlock doors when Engine stopped if either auto-locked during driving or manually locked
Enable Fog Lights with Parking Lights
Enable Fog Lights with High Beams
Allow Front Window Roll Up when doors opened
Allow Rear Window Roll Up when doors opened
Close Trunk with KeyFOB
Remove Seat Belt Warnings
Disable Headlight Washers
Enable HVAC to Remember Settings when vehicle shutdown
Disable Turning on A/C if AUTO is pressed
Disable Seat Belt Status in Cluster (Passenger/ Driver)
Disable Seat Belt Reminder (Driver/ Passenger)
Disable Seat Belt Disconnected Reminder Sound (Driver/ Passenger)
Disable Initial Belt Warning
Disables 1st fuel warning at 50 miles
Efficient Dynamics Graph Direction (Left to Right or Right to Left)
Trip Computer Auto Reset (Never/ Always/ 4 Hours)
Enables HUD Distance Info
LIM FUNCTION
Disable Cluster ASS notification
Enable/Disable Speed Correction
Cameras at All Speeds
Various (12+) Head Unit Functions (Disclaimer Removal, Entire SMS message, British Navigation Voice, Tire Pressure & Temp, etc)