View Single Post
      02-25-2013, 04:11 PM   #2
DrEcks5
Banned
0
Rep
25
Posts

Drives: '12 X5
Join Date: Feb 2013
Location: Texas

iTrader: (0)

If it's the outer assembly on the body, it should be like most BMWs and held by 3 or 4 nuts. Just unplug the cable, unscrew, and reverse.

If it's the inner assembly on the tail lid, then the same procedure applies and is either held by 1 or 2 nuts. You just need take off the inner liner first.
Appreciate 0