|
03-11-2022, 07:53 AM | #1 |
New Member
0
Rep 14
Posts |
System Too Lean Bank 2
Hey guys, hope all is well. Just need some quick help here
Long story short I had to get the Exhaust Cam gear replaced on my car, found an amazing Legend Master Tech that did it last month lol. Literally did it in like 4 hours, car ran awesome afterwards Shortly though I noticed extra gas burning, and a System Too Lean Bank 2 Code popped up. I swapped both MAFs and cleaned them, code still eventually comes back. So I'm down to it being a vacuum leak Because from testing & watching the LTFT's, they're in the high 20s during idle...then drop dramatically after you raise the rpms. My guess is something wasn't put back all the way, a loose line or something. Car runs immaculate on the highway, which says vaccum leak even more So before a shop robs me trying to diagnose it, where should I look? Or best way to check without smoke test. I checked the intake area, the orange seal is tight. Appreciate the help thank you. I'll post screenshots of the diagnostics https://vimeo.com/687118708 Last edited by FlyNikolai; 03-11-2022 at 08:00 AM.. |
Post Reply |
Bookmarks |
|
|