Firearms

[GP0256]

Originally Posted by Cuz5150

Im refusing to buy/get in to the 1911 habit. No way!!!
I have a half a dozen 9mm's.......
Not going to catch the 1911 disease

I didn't want to either but wanted to get into competition shooting so I bought a match grade Wilson Combat and it is by far the best gun I own right now. I almost feel like it should have been my very first gun!!!

[Fundguy1]

1911 ftw

[Scout10]

Originally Posted by Zooligan

Hate to burst your bubble, but last year was 2016.

No bubble to bust ... thats why i said time flies . . knew i missed a year!
its still a good shooter despite the vintage.

[Graves]

Just picked these two up:

SIG P320

SIG MCX SBR FDE

[Dang3r]

Dont like TAN as colour, but the guns are nice

[Fundguy1]

P320 just had a recall to stop accidental discharges. No incidents but they anticipated a potential issue. I'd have the gun shop check it to see if it's post recall. Just happened a few weeks ago.

[Graves]

Originally Posted by Fundguy1

P320 just had a recall to stop accidental discharges. No incidents but they anticipated a potential issue. I'd have the gun shop check it to see if it's post recall. Just happened a few weeks ago.

Wow, thanks for the info. I haven't even fired it yet.

[MadOzodi]

TTAG did a video showing drop safety failing or something like that (didn't watch the video, just noticed the post on my annoying FB feed). What's even more of a fail to me is the title picture they used...smh.

[fravel]

Originally Posted by Graves

Wow, thanks for the info. I haven't even fired it yet.

It only occurs when the gun is dropped at a very specific angle, you're perfectly fine to shoot it, just don't drop it.

[1MOREMOD]

Slide and frame have to hit ground at same time at the butt of the gun. Not ideal but don't drop your gun not issue

[Graves]

I'll be straight, I operate.

[Hawkeye]

I finally sent my XDs in for a recall (1-2 years after they issued it?) and they sent me back a free extended mag for my "trouble". Thanks Springfield! The full turnaround was also only about a week, which makes me glad I waited since I heard several months was the wait time right when the recall was issued.

[1MOREMOD]

What's the recall have an xdm 3.8 9mm that's used as a house stash gun.

[upstatedoc]

Originally Posted by 1MOREMOD

What's the recall have an xdm 3.8 9mm that's used as a house stash gun.

Where do you stash it?

[1MOREMOD]

Ottoman, many others throughout

[Hawkeye]

Originally Posted by 1MOREMOD

What's the recall have an xdm 3.8 9mm that's used as a house stash gun.

This was only the XDs 3.3 as far as I know.

http://www.springfieldrecall.com/recall.asp

[davis449]

Originally Posted by Hawkeye

This was only the XDs 3.3 as far as I know.

http://www.springfieldrecall.com/recall.asp

Yes, it was only this model. I have a full size 3.8, excellent gun.

[xander_g]

I'm hoping to get my first AR-pattern rifle in the coming months.

I am definitely set on getting a piston one as opposed to direct impingement and I am down to two choices: SIG516 or HK416. I'm leaning towards the HK but since both options are pricey, I need to get some trigger time on both platforms before making a choice.

Living in Canada, we're not allowed to have AK pattern rifles otherwise I would get one before the AR. Not to mention any rifles mags must be pinned to 5 rounds and pistol mags must be pinned to 10 rounds.

[Graves]

Originally Posted by xander_g

I'm hoping to get my first AR-pattern rifle in the coming months.

I am definitely set on getting a piston one as opposed to direct impingement and I am down to two choices: SIG516 or HK416. I'm leaning towards the HK but since both options are pricey, I need to get some trigger time on both platforms before making a choice.

Living in Canada, we're not allowed to have AK pattern rifles otherwise I would get one before the AR. Not to mention any rifles mags must be pinned to 5 rounds and pistol mags must be pinned to 10 rounds.

Murica!

[upstatedoc]

Originally Posted by xander_g

I'm hoping to get my first AR-pattern rifle in the coming months.

I am definitely set on getting a piston one as opposed to direct impingement and I am down to two choices: SIG516 or HK416. I'm leaning towards the HK but since both options are pricey, I need to get some trigger time on both platforms before making a choice.

Living in Canada, we're not allowed to have AK pattern rifles otherwise I would get one before the AR. Not to mention any rifles mags must be pinned to 5 rounds and pistol mags must be pinned to 10 rounds.

I think I would probably prefer an AR if the shit hits the fan then an AK.

[PINeely]

Originally Posted by xander_g

I'm hoping to get my first AR-pattern rifle in the coming months.

I am definitely set on getting a piston one as opposed to direct impingement and I am down to two choices: SIG516 or HK416. I'm leaning towards the HK but since both options are pricey, I need to get some trigger time on both platforms before making a choice.

Living in Canada, we're not allowed to have AK pattern rifles otherwise I would get one before the AR. Not to mention any rifles mags must be pinned to 5 rounds and pistol mags must be pinned to 10 rounds.

Any particular reason you want piston instead of DI? How much are you going to be shooting it realistically?

If you do want piston don't rule out Colt.

[kscarrol]

OK, might be the wrong place to ask this but you guys have way more experience than I do. I own several shotguns but I'm thinking of picking up a hand gun to keep in the house. Mostly self defense and at this point I'm not looking for something for concealed carry. Think 9mm is the way to go and from what I can tell SIG and Glock seem to be the go to choices. Any advice/suggestions? TIA!