|
|
Post Reply |
|
Thread Tools | Search this Thread |
12-13-2017, 12:08 PM | #1 |
New Member
5
Rep 24
Posts |
Removing turbos on N63, what should I change in the process?
I am finally ready to replace "turbo oil return housing gasket" on 2010 N63 which is requiring removal of the turbos. Is there anything I should be replacing in the process in addition to the gasket?
Thanks, Vadim |
08-24-2018, 12:24 PM | #3 |
New Member
5
Rep 24
Posts |
I think it was leaking sine there was oil residual in the valley between cylinders. Job was mostly straight forward following https://www.newtis.info/tisv2/a/en/f...lines/1LfksGKy. Hardest part was to figure out how to remove passenger side catalytic converter cover, other than that, no surprises that I remember (you do need to remove alternator, so you may want to start with it, would make the rest easier to access).
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|