|
newTIS.infobeta
Home / BMW F02 760Li Sedan / Repair Manuals and Technical Data / 64 Heating and air conditioning / 64 53 Condenser and dryer with lines /
51 61 Reinforcement, body
Tightening Torques
Type Thread Tightening specifications Torque
1AZ
Suspension cross-brace in engine compartment, rear
F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 M10x47 Renew screws
Jointing torque 30 Nm
Angle of rotation 90 °
F15 / F16 Renew screws
Jointing torque 25 Nm
Angle of rotation 90 °
F25 / F26 M10x25 Renew screws
Jointing torque 56 Nm
Angle of rotation 90 °
2AZ
Suspension cross-brace in engine compartment, front
F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 M10x25 56 Nm
F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 M10x47 Renew screws
Jointing torque 30 Nm
Angle of rotation 90 °
3AZ
Connection, rear, to carrier support
F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 28 Nm
4AZ
Connection, front, to connection, rear
F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 19 Nm
5AZ
Engine compartment lid catch
F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 M8x20 11,8 Nm
6AZ
V-support to connection, front
F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 19 Nm
7AZ
Air duct, lower, to vertical strut
F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 19 Nm
8AZ
Air duct, lower, to carrier
F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 M8 8 Nm
9AZ
Air duct, upper, on lock support
F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 M8 8 Nm
10AZ
Trailing link/V-strut on side member
F07 / F11 / F12 / F13 M12 Renew screws
Jointing torque 100 Nm
Angle of rotation 90 °
11AZ
Trailing link to compression strut, rear axle
F07 / F11 / F12 M8 19 Nm
12AZ
Trailing link to cross reinforcement (rear end support)
F07 / F11 / F12 M12 Renew screws
Jointing torque 100 Nm
Angle of rotation 90 °
13AZ
Cross reinforcement (support, rear end) to rear end
F07 / F11 / F12 M10x22 38 Nm
14AZ
Cross reinforcement (support, rear end) to cross-member
F07 / F11 / F12 M10 38 Nm
15AZ
Torsion struts/stiffening plate to front axle support
F01 / F02 / F03 / F12 M10 Renew screws
Jointing torque 56 Nm
Angle of rotation 90 °
16AZ
Rear trailing link
F10 / F12 M10x40 Renew screws
Jointing torque 56 Nm
Angle of rotation 105 °
17AZ
Rear trailing link
F10 / F12 M8x35 Renew screws
Jointing torque 28 Nm
Angle of rotation 90 °
|