Quote:
Originally Posted by AlteBMW
You also need to put the car in diagnostic mode by hitting the on/off button 3x quickly. I am not sure the Bimmercode instructions are clear enough on this.
|
I have the OBDLink MX+ and I’ve never once had to do that.
I leave my adapter connected all the time. I just fire up bimmercode, select 7 series and it connects and the car automatically goes into diagnostic mode.
To the OP. Does your adapter say OBDLink MX+ on the front? If it’s doesn’t then it won’t be a MX+ hence why it may not be working properly. If it does then the adapter may be faulty so see if you can get a replacement.