Coding a 7 Series?

EliaZinn · 08-26-2018, 12:02 PM

Quote:

Originally Posted by Almaretto

DO you have access to BDC_Body in Bimmercode? Code is there.

Unfortunately I do not- see a screenshot of all my options (unless its in expert mode).

Also trying to find a way to code the BMW Ambient Air to turn on automatically with the can- anyone know?

Thanks..

Almaretto · 08-26-2018, 12:37 PM

Quote:

Originally Posted by EliaZinn

Unfortunately I do not- see a screenshot of all my options (unless its in expert mode).

Also trying to find a way to code the BMW Ambient Air to turn on automatically with the can- anyone know?

Thanks..

May not be supported yet, unless it is in expert mode.

turas · 09-17-2018, 02:47 AM

I've use Bimmercode and it's week in "standard" mode. It's looks better in expert mode but it's hard to know what do you want to change.
I want to change:
- seat belts reminder remove
- change start up logo in rear entertaiment system
- start/stop turn off
- change "drive mode" from default to last choice

I'll be grateful for helping me where i can find it in expert mode.

keithbui86 · 09-27-2018, 11:24 PM

Hi,

my g12 come with Harman Kardon sound system. I retrofit it to Bower wilkin system.

Done all the wiring right.

Just find out the B&W system require bigger power cable for the amp.

Change the power cable.

Suddenly the sound is bigger but bad. No more define and control, middle sound flat, tweet lose it crisp sound it used to has.

What could be a problem? is it possible that the amplifier has reset when i discharge it? Do i need to recoding all the way again?
Feeling really bad.

Please help and pardon my english.

Best regards.

Almaretto · 09-27-2018, 11:26 PM

Quote:

Originally Posted by keithbui86

Hi,

my g12 come with Harman Kardon sound system. I retrofit it to Bower wilkin system.

Done all the wiring right.

Just find out the B&W system require bigger power cable for the amp.

Change the power cable.

Suddenly the sound is bigger but bad. No more define and control, middle sound flat, tweet lose it crisp sound it used to has.

What could be a problem? is it possible that the amplifier has reset when i discharge it? Do i need to recoding all the way again?
Feeling really bad.

Please help and pardon my english.

Best regards.

Did you VO code?

BMW Thailand · 11-26-2018, 11:41 PM

I have just done the retrofit and the result after coding is that all lights are coming up one-by-one for only few seconds then after everything goes off.

It is an obvious error code but I can't figure what is wrong.

Did a new custom wiring and replaced both FRM (61 35 6 992 947) and ZGW (61 35 9 322 532)

All modules are brand new.

Any ideas would be greatly appreciated.

BR, Thank you.

iyad.nasser · 12-13-2018, 07:24 AM

Quote:

Originally Posted by CaboM4

I am using TokenMaster's Launcher PRO 2.5.5 Build 120

There are no cheat codes found for CAFD_00002098

Did you modify your FDLCodes.xml file? Can you share which 2 lines you are modifying?

what program is that ?

Almaretto · 12-13-2018, 09:44 PM

Quote:

Originally Posted by iyad.nasser

what program is that ?

https://www.bimmerfest.com/forums/sh...d.php?t=983244

Wills2 · 12-27-2018, 08:03 AM

Has anyone coded the Alpina blue instruments on their 7 yet? Bimmercode says it's available but I wonder if the diesel dials are there or just the petrol. (rev counter)

turas · 01-04-2019, 11:37 AM

It works on diesel.

Wills2 · 01-04-2019, 01:41 PM

Quote:

Originally Posted by turas

It works on diesel.

Thanks Turas.

turas · 02-05-2019, 12:57 PM

Where to find option to change to Rolls Royce sound gongs in bimmercode?

Almaretto · 02-06-2019, 12:20 AM

Quote:

Originally Posted by turas

Where to find option to change to Rolls Royce sound gongs in bimmercode?

Expert Mode > HU_NBT2

M6BMWDriver · 02-06-2019, 03:35 PM

Hi There,

I have a 2018 G12, not able to remove the seat belt reminder. The cheat code did did not see the codes in the ncd file. Any idea where i can find it?

turas · 02-07-2019, 07:20 AM

Quote:

Originally Posted by Almaretto

Expert Mode > HU_NBT2

Thank You. Is it possible to change sensitivity of mirrors anti-dazzle function via bimmercode?

M6BMWDriver · 02-07-2019, 09:28 PM

Quote:

Originally Posted by M6BMWDriver

Hi There,

I have a 2018 G12, not able to remove the seat belt reminder. The cheat code did did not see the codes in the ncd file. Any idea where i can find it?

Dear All,
I found a way to deactivate the Seat Belt reminder in a 2018 G12 750

the warning is based on the speed of the car, and there is no way to just turn it off, so you have to override the Wrete to FF

HERE is HOW

edit FDL CAF [ACSM_5]
under 3001 Gurtwarnung, 32
SBR variant (Not sure what this is)
SBR (Seat Belt) disabled without SBE (long-term); SbrVariantDriv set to SBR_ohne_SBE_SBR-3.0 SbrVariantPas set to SBR_ohne_SBE_SBR-3.0

Deactivation belt condition indicator driver in cluster SbrDispBltStDrivEnb Set to NICHT_¬AKTIV
Deactivation belt condition indicator front passenger in cluster SbrDispBltStPasEnb Set to NICHT_¬AKTIV
Speed threshold for motion detectionSbrVvehMotion Wrete = FF
Speed threshold for SBR (Seat Belt) warningSbrVvehWarn Wrete = FF
Speed threshold Cancellation of Drive warning to FFSbrVvehWarnCnclDriv Wrete = FF

I hope that will help.

Martin2C · 02-08-2019, 09:05 AM

I must be missing something, why would you want/need to turn off the seat belt reminder?

M6BMWDriver · 02-08-2019, 05:08 PM

Quote:

Originally Posted by Martin2C

I must be missing something, why would you want/need to turn off the seat belt reminder?

Because it’s annoying
And when you get stuck in a car and you can’t get out in an accident, like it happened to me and the fire department had to cut it off, you think i want to wear that thing anymore!!!

Wills2 · 02-10-2019, 10:59 AM

Quote:

Originally Posted by M6BMWDriver

Because it’s annoying
And when you get stuck in a car and you can’t get out in an accident, like it happened to me and the fire department had to cut it off, you think i want to wear that thing anymore!!!

Yes, that way there is still something worth cutting out.

markymarc1979 · 02-17-2019, 05:16 PM

I got one. For all you G series owners with drivers assistance. Wouldn't it be nice to extend or remove all together the automated steering cancellation when you take your hands off the wheel for an extended period of time?

Not sure if I explained it clear. With steering assist enabled, taking your hands off the wheel for 7-10 seconds and the features disables. Would love to disable that.

Wills2 · 02-17-2019, 05:27 PM

Quote:

Originally Posted by markymarc1979

I got one. For all you G series owners with drivers assistance. Wouldn't it be nice to extend or remove all together the automated steering cancellation when you take your hands off the wheel for an extended period of time?

Not sure if I explained it clear. With steering assist enabled, taking your hands off the wheel for 7-10 seconds and the features disables. Would love to disable that.

I like to have my hands on the wheel but I'm old fashioned that way, it disables because the car isn't capable of driving itself.

markymarc1979 · 02-17-2019, 05:30 PM

Quote:

Originally Posted by Wills2

Quote:

Originally Posted by markymarc1979

I got one. For all you G series owners with drivers assistance. Wouldn't it be nice to extend or remove all together the automated steering cancellation when you take your hands off the wheel for an extended period of time?

Not sure if I explained it clear. With steering assist enabled, taking your hands off the wheel for 7-10 seconds and the features disables. Would love to disable that.

I like to have my hands on the wheel but I'm old fashioned that way, it disables because the car isn't capable of driving itself.

I understand the safety aspect of it, but it disengages too quickly.

If theres an option to extend or disable all together, I'm definitely coding it.

09-17-2018, 02:47 AM	#135
turas Private First Class 62 Rep 104 Posts Drives: 440ix Join Date: Dec 2017 Location: Poland iTrader: (0)	I've use Bimmercode and it's week in "standard" mode. It's looks better in expert mode but it's hard to know what do you want to change. I want to change: - seat belts reminder remove - change start up logo in rear entertaiment system - start/stop turn off - change "drive mode" from default to last choice I'll be grateful for helping me where i can find it in expert mode.
	Appreciate 0 Quote

09-27-2018, 11:24 PM	#136
keithbui86 Registered 0 Rep 3 Posts Drives: bmw g12 Join Date: Aug 2018 Location: singapore iTrader: (0)	Hi, my g12 come with Harman Kardon sound system. I retrofit it to Bower wilkin system. Done all the wiring right. Just find out the B&W system require bigger power cable for the amp. Change the power cable. Suddenly the sound is bigger but bad. No more define and control, middle sound flat, tweet lose it crisp sound it used to has. What could be a problem? is it possible that the amplifier has reset when i discharge it? Do i need to recoding all the way again? Feeling really bad. Please help and pardon my english. Best regards.
	Appreciate 0 Quote

11-26-2018, 11:41 PM	#138
BMW Thailand Registered 0 Rep 3 Posts Drives: 2010 BMW F02 730Ld Join Date: Nov 2018 Location: Thailand iTrader: (0)	Has anyone retrofitted/coded up LED headlights, yet? I have just done the retrofit and the result after coding is that all lights are coming up one-by-one for only few seconds then after everything goes off. It is an obvious error code but I can't figure what is wrong. Did a new custom wiring and replaced both FRM (61 35 6 992 947) and ZGW (61 35 9 322 532) All modules are brand new. Any ideas would be greatly appreciated. BR, Thank you.
	Appreciate 0 Quote

12-27-2018, 08:03 AM	#141
Wills2 Barge driver 8647 Rep 12,421 Posts Drives: 730d Join Date: Aug 2014 Location: UK iTrader: (0)	Has anyone coded the Alpina blue instruments on their 7 yet? Bimmercode says it's available but I wonder if the diesel dials are there or just the petrol. (rev counter) __________________ 730d/Z4C
	Appreciate 0 Quote

01-04-2019, 11:37 AM	#142
turas Private First Class 62 Rep 104 Posts Drives: 440ix Join Date: Dec 2017 Location: Poland iTrader: (0)	It works on diesel.
	Appreciate 1 Wills28647.00 Quote

02-05-2019, 12:57 PM	#144
turas Private First Class 62 Rep 104 Posts Drives: 440ix Join Date: Dec 2017 Location: Poland iTrader: (0)	Where to find option to change to Rolls Royce sound gongs in bimmercode?
	Appreciate 0 Quote

02-06-2019, 03:35 PM	#146
M6BMWDriver Private First Class 69 Rep 176 Posts Drives: F12 Singapore Gray M6 Conv Join Date: Sep 2016 Location: NYC iTrader: (0)	Hi There, I have a 2018 G12, not able to remove the seat belt reminder. The cheat code did did not see the codes in the ncd file. Any idea where i can find it?
	Appreciate 0 Quote

02-08-2019, 09:05 AM	#149
Martin2C Second Lieutenant 44 Rep 226 Posts Drives: 2017 750i M Sport Join Date: Apr 2016 Location: Northamptonshire iTrader: (0)	I must be missing something, why would you want/need to turn off the seat belt reminder?
	Appreciate 0 Quote

02-17-2019, 05:16 PM	#152
markymarc1979 Banned 268 Rep 2,534 Posts Drives: 16 G12 + 15 F06 + 17 F15 Join Date: Feb 2008 Location: Oakville, Ontario iTrader: (4) Garage List 2009 BMW E93 [0.00] 2012 BMW 750xi [0.00]	I got one. For all you G series owners with drivers assistance. Wouldn't it be nice to extend or remove all together the automated steering cancellation when you take your hands off the wheel for an extended period of time? Not sure if I explained it clear. With steering assist enabled, taking your hands off the wheel for 7-10 seconds and the features disables. Would love to disable that.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search