Coding a 7 Series?

[Almaretto]

Originally Posted by sarb2

Thanks for reply

But what i need to change in any foler and details like this if you know

Thanks

I do not have a list. I just use the cheat codes I wrote.

[turas]

2017 730xd B57 engine. Is it possible to deactivate swirl flap motor that open and close flaps?

I have 2F8500 error code.
Maybe it can be done some adaptation?
Everything is running ok.

[quumies]

Hey. I have reclining rear seats, and passanger side also have button to fold down front seat. Problem is that kids can press button and start front seat to fold even someone is sitting at front. Is that normal? It was quite hectic moment when my aging dad was sitting at front, and seat began to crush him when my son pushed wrong button at back. Is there way to prevent this.

[mrgicm]

Originally Posted by quumies

Hey. I have reclining rear seats, and passanger side also have button to fold down front seat. Problem is that kids can press button and start front seat to fold even someone is sitting at front. Is that normal? It was quite hectic moment when my aging dad was sitting at front, and seat began to crush him when my son pushed wrong button at back. Is there way to prevent this.

Yes, you can lock the rear seat adjustment and control by locking the rear windows on the driver door next to the window control buttons.

[B-HQC]

I'm a bimmercode user and it appears the option to code the code the vehicle to start up in "Adaptive" mode (instead of Comfort) no longer appears on the LCI model. No issue on the pre LCI (16-19). Any fix or workaround for this?

[9mmkungfu]

Looking to enable VLD/NGHB on a G12. Other than 5AP and 8S4 removal from FA, can someone post what other changes need to be made?

[Almaretto]

Originally Posted by 9mmkungfu

Looking to enable VLD/NGHB on a G12. Other than 5AP and 8S4 removal from FA, can someone post what other changes need to be made?

There are many changes in BDC and FLM.

[9mmkungfu]

Originally Posted by Almaretto

There are many changes in BDC and FLM.

Thank you. Do you have a list of the changes needed? I've looked but unable to find the information. I checked your XML on Git as well and didn't see it in there, although the update date says 2 years ago

[Almaretto]

Originally Posted by 9mmkungfu

Thank you. Do you have a list of the changes needed? I've looked but unable to find the information. I checked your XML on Git as well and didn't see it in there, although the update date says 2 years ago

Sorry, I do not have all the changes written out to share.

[krautmeister]

I haven't found any conclusive results to see if I can get the rear HDMI input to play on the front screen on Rear Seat Entertainment options? I know European models have TV in motion right? I need a way to be able to control the rear monitors and see what I'm clicking so the tiny tyrant VIP passenger can be satiated! . I'm running Roku on a stick w/ BMW hotspot.

[ewoody]

As far as I know on the PreLCI 7 the rear hdmi input is not connected to the front screen.

So it won't be possible.

This would work on the LCI models.

[abo7maid]

Originally Posted by MauricioJay21

Hey guys long time lurker, I’ve looked through tons of pages and threads and cannot find whether or not it’s possible to code the M760 cluster into my 750i, not the M760i logo but the cluster itself which shows 200mph on the dash. I’ve tried a couple things in BimmerCode expert mode but no dice, any input appreciated thank you

I think I have managed to get that done but I have no clue if that's safe or not, just my own/self experimentation, Go to instrument cluster on BimmerCode, then Expert mode and search for "MPA_ENABLE" and click on aktiv as it shows then start coding, however I haven't tried it that long only a few mins and got it back to the default one because I am taking the car to the Service. but it worked tho .. I hope it is safe doing as I haven't seen anyone has posted something about it. I believe this is what you meant by original layout, my car is a G11 740Li 2019.

[Bogdanel]

Hey guys, I've been trying to find some methods to code the following :

1. Make screen mirroring full screen
2. Soft touch turn signals to 5 blinks - I have found a way to put it in the Headunit but can't select it
3. Either remote start the car, or enable remote start for preconditioning ventilation.
4. Change the hud skin to the M hud, and add turn signals in the hud, and add more things to the hud.
5. Add the recommended tyre pressure feature in the tpms as seen on x3 2019.

If you guys have any input on that would be amazing

[jimmyvonvitti]

Hey I just recently had the lowering links installed on my 740. The car appears to be lower while driving but when I park, it lifts back up. Does anyone know how to code it to where it stays lowered even when in park?

[Bogdanel]

Originally Posted by jimmyvonvitti

Hey I just recently had the lowering links installed on my 740. The car appears to be lower while driving but when I park, it lifts back up. Does anyone know how to code it to where it stays lowered even when in park?

How did you manage to lower your car, can you provide the values you changed and where ? Thank you

[Grizzle34]

https://www.airmatic-lowering-links....-lowering-kit/

[jimmyvonvitti]

Originally Posted by Bogdanel

How did you manage to lower your car, can you provide the values you changed and where ? Thank you

I had the lowering links installed. Took my car to a shop that specializes in BMW and Porsche.
Car still lifts back up when in park so I need some coding done.

[Almaretto]

Originally Posted by Bogdanel

Hey guys, I've been trying to find some methods to code the following :

1. Make screen mirroring full screen
2. Soft touch turn signals to 5 blinks - I have found a way to put it in the Headunit but can't select it
3. Either remote start the car, or enable remote start for preconditioning ventilation.
4. Change the hud skin to the M hud, and add turn signals in the hud, and add more things to the hud.
5. Add the recommended tyre pressure feature in the tpms as seen on x3 2019.

If you guys have any input on that would be amazing

1. Not aware of any fix in coding. But, re-encoding videos to match screen resolution can correct.
2. This works on ID7 with coding in BDC and MGU.
3. Remote start requires display key, vehicle antenna, coding, and initialization with ISTA.
4. HUD Turn signals does not work on any DKOMBI (digital dash)
5. The temperature dependent recommended values?

[Bogdanel]

Originally Posted by Almaretto

1. Not aware of any fix in coding. But, re-encoding videos to match screen resolution can correct.
2. This works on ID7 with coding in BDC and MGU.
3. Remote start requires display key, vehicle antenna, coding, and initialization with ISTA.
4. HUD Turn signals does not work on any DKOMBI (digital dash)
5. The temperature dependent recommended values?

1.I'm talking about the android screen mirroring, I just get half of the screen of the navigation.
2. I managed to find the values to have it in the HMI, but i cannot select it, what are the values which i need to modify in BDC ?
3. I have display key, i also have remote parking, thats why i thought it might be easier, can you tell me how to do it ?
4. Understood.
5. I think is load dependent, I've seen it on X3 G01.
Also another one:
6. How can i make the fog lights turn on when unlocking the car ?

[Bogdanel]

Originally Posted by jimmyvonvitti

I had the lowering links installed. Took my car to a shop that specializes in BMW and Porsche.
Car still lifts back up when in park so I need some coding done.

Oh, i thought is just from coding
How's the ride now ? Is it bumpier ?

[Almaretto]

Originally Posted by Bogdanel

1.I'm talking about the android screen mirroring, I just get half of the screen of the navigation.
2. I managed to find the values to have it in the HMI, but i cannot select it, what are the values which i need to modify in BDC ?
3. I have display key, i also have remote parking, thats why i thought it might be easier, can you tell me how to do it ?

1. When just mirroring, not sure there is fix. I am referring to playing a video full screen.
2. PIA_DEFAULT_TIPPBLINKEN_AB_2018
3. Attaching steps for Remote control park. Remote start may have something similar.

[Bogdanel]

Originally Posted by Almaretto

1. When just mirroring, not sure there is fix. I am referring to playing a video full screen.
2. PIA_DEFAULT_TIPPBLINKEN_AB_2018
3. Attaching steps for Remote control park. Remote start may have something similar.

2. I have this on my G11 with ID6, but I tried modifying it and still I cannot select the 5 blinking in the NBT Headunit.
3. There is nothing written about coding, only to use ista, is there any tutorial with the lines I need to modify?
I'm only using bimmercode for now.

Thank you very much for your help and patience!