|
02-19-2018, 12:39 PM | #1 |
New Member
0
Rep 11
Posts |
New to BMW Not a Good Start,Taking car to the Dealer?
Hello,
New to BMW. Just bought a 2011 740LI in Mineral White 3 weeks ago. I read up a bit about these cars and the issues that they. Which is why I went with the straight 6 (n54) instead of the v8. Anyway my car has 87k miles. Knowing that it has been maintained to a degree. I decided to do some standard maintenance items. air filter, oil change, cabin filter. I start getting these misfires (this also happened before the items that I did). So I figure the plugs should probably be changed. So I go ahead and change the plugs and coil packs. I even decided to change the Vanos solenoids. Just because I read somewhere that they are only good for 50-75k miles. The misfires continue. I also found out that the fuel injectors are still under warranty and could also be the cause. I have 3 index 7 on cylinder 4-6 and 3 index 11 on 1-3. I know walnut blasting is also a good idea and is on the list to get done. Should I do the walnut blasting before taking it to the dealer to check the injectors or just let the dealer do there thing? What is a diagnostic going to cost? These are the codes I got a few days ago. PO304 PO300 PO302 PO133 PO153 Any suggestions? Thanks |
Post Reply |
Bookmarks |
|
|