Coding a 7 Series?

FastLaneJB · 02-24-2018, 11:31 AM

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by FastLaneJB

Almaretto,

Do you know about coding out the limiter or M Drivers Package within the 10 hour run time window? They don't sell it as an option in the UK.

From what I've read that module is unlocked and then after 10 hours of run time it locks and cannot be changed (Without BMW's private key).

Thanks

Yes. It is VO or FDL option in DME/DDE.

Is this possible on the 7 series? If it just a case of changing the limiter or another option to add to make it think it has the M Drivers Package?

Almaretto · 02-25-2018, 01:41 AM

Quote:

Originally Posted by FastLaneJB

Is this possible on the 7 series? If it just a case of changing the limiter or another option to add to make it think it has the M Drivers Package?

Possible on all series. Specific function for top speed.

FastLaneJB · 02-25-2018, 05:58 AM

Quote:

Originally Posted by Almaretto

Possible on all series. Specific function for top speed.

Thanks for the info, I'll have to research this a bit more then. If I feel confident I'll get myself the software and cable needed.

emulajavi · 03-09-2018, 04:37 PM

Quote:

Originally Posted by Almaretto

You can code Carplay if you have updated firmware and third party FSC.

You can also toggle ID6.

PM Sent.

I have an early G11 with WiFi and ID5.

Can I have ID6 and CarPlay? ConnectedDrive website doesn’t offer CarPlay although my car has the necessary hardware. How can I make the website to offer it? Or how can I enable it?

Thanks.

Almaretto · 03-09-2018, 11:50 PM

Quote:

Originally Posted by emulajavi

I have an early G11 with WiFi and ID5.

Can I have ID6 and CarPlay. ConnectedDrive website doesn’t offer CarPlay although my cars has the necessary hardware. How can I make the website to offer it? Or how can I enable it?

Thanks.

Any vehicle with ID5 or ID6 with Nov '17 or later software can have. PM me for details.

325_bucks · 03-11-2018, 01:33 PM

Almaretto had a look at the coding today, using latest 4.10.13 psdzdata and launcher 2.8.0 and I could only see 8 ecus. BDC_Body has the cheat code for ASS but it said NA Only and didn't show any FDL in it.

Is ASS memory in BDC_BODY2 or something else? I can't see any DME type ECUs. The only coding I was able to do was add tyre temperatures, I did this to make sure it worked and as I had it before, but it was the only semi useful thing I wanted that I could code.

All I want now is ASS memory, chose the drive mode if possible and auto high beam on as standard.

Thanks for your help or PM me if necessary, please!

Almaretto · 03-11-2018, 03:58 PM

Quote:

Originally Posted by 325_bucks

Almaretto had a look at the coding today, using latest 4.10.13 psdzdata and launcher 2.8.0 and I could only see 8 ecus. BDC_Body has the cheat code for ASS but it said NA Only and didn't show any FDL in it.

Is ASS memory in BDC_BODY2 or something else? I can't see any DME type ECUs. The only coding I was able to do was add tyre temperatures, I did this to make sure it worked and as I had it before, but it was the only semi useful thing I wanted that I could code.

All I want now is ASS memory, chose the drive mode if possible and auto high beam on as standard.

Thanks for your help or PM me if necessary, please!

You need to update Cheat Codes.

ASS is not done in BDC_Body.

Launcher Pro has updated mapping to be able to code more ECU's.

Drive mode and ASS memory are possible. Auto-HBA is not.

325_bucks · 03-28-2018, 10:36 AM

Seems like TM has updated LP and is responding again? I hope he responds soon, I'd love to get coding

Almaretto · 03-28-2018, 10:00 PM

Quote:

Originally Posted by 325_bucks

Seems like TM has updated LP and is responding again? I hope he responds soon, I'd love to get coding

His emails were landing in SPAM, but, yes, new update and he is responding.

325_bucks · 03-29-2018, 09:34 AM

Quote:

Originally Posted by Almaretto

His emails were landing in SPAM, but, yes, new update and he is responding.

ok thanks, nothing yet but will keep waiting I guess

paul.j.ghosh · 03-29-2018, 06:51 PM

Almaretto - do you know if support for i-Step 17-11 is coming?

Almaretto · 03-29-2018, 10:25 PM

Quote:

Originally Posted by 325_bucks

ok thanks, nothing yet but will keep waiting I guess

If more than a week or two passes, send follow-up message.

Quote:

Originally Posted by paul.j.ghosh

Almaretto - do you know if support for i-Step 17-11 is coming?

Yes, and 18-520.

325_bucks · 04-02-2018, 09:46 AM

Almaretto,

Managed to get LP 3.1.0. So far only managed to code ASS memory which I thought was in BDC until I remembered that’s not the case anymore.

But I can’t code drive mode as BDC is not showing any information, just . for module 3221 which I think is where the drive mode settings are.

My I step is 18.03.05 (I think). Is this the reason why the data is still trimmed and I can’t see your cheat codes?

325_bucks · 04-02-2018, 11:50 AM

...looking around online it seems (you've said elsewhere) that BDC_BODY2 is actually mapped in the latest Launcher Pro. But I don't see it. Any ideas?

Almaretto · 04-02-2018, 12:58 PM

Quote:

Originally Posted by 325_bucks

Almaretto,

Managed to get LP 3.1.0. So far only managed to code ASS memory which I thought was in BDC until I remembered that’s not the case anymore.

But I can’t code drive mode as BDC is not showing any information, just . for module 3221 which I think is where the drive mode settings are.

My I step is 18.03.05 (I think). Is this the reason why the data is still trimmed and I can’t see your cheat codes?

Install 64-bit Java. Copy contents over to E-sys directly in jre_x64 created folder. Then up memory. Also use launcher settings to remove kiswb that you do not need. Then, BDC_Body should display correctly.

325_bucks · 04-03-2018, 09:40 AM

Quote:

Originally Posted by Almaretto

Install 64-bit Java. Copy contents over to E-sys directly in jre_x64 created folder. Then up memory. Also use launcher settings to remove kiswb that you do not need. Then, BDC_Body should display correctly.

Thanks, this worked well, and I can read BDC_BODY2 now, however i'm still unsure what to code as i'm aware you don't have cheat codes for drive mode. In the list attached, which module should be coded to change the default startup mode?

Thanks

Almaretto · 04-03-2018, 07:30 PM

Quote:

Originally Posted by 325_bucks

Thanks, this worked well, and I can read BDC_BODY2 now, however i'm still unsure what to code as i'm aware you don't have cheat codes for drive mode. In the list attached, which module should be coded to change the default startup mode?

Fespiadefaultlastusermode

325_bucks · 04-04-2018, 02:28 AM

Yes that's what I thought it would be too but in there I only get the option of Comfort, EcoPro or another option that's in German, I guess it's not yet mapped correctly?

Almaretto · 04-04-2018, 02:32 AM

Quote:

Originally Posted by 325_bucks

Yes that's what I thought it would be too but in there I only get the option of Comfort, EcoPro or another option that's in German, I guess it's not yet mapped correctly?

Use werte values to chose desired start option.

325_bucks · 04-04-2018, 02:33 AM

Quote:

Originally Posted by Almaretto

Use werte values to chose desired start option.

ah I see, well my next question is obvious, do you know if there is a list of werte values that correspond to the drive modes? Thanks for all your help, it's been very useful

325_bucks · 04-04-2018, 02:35 AM

also does setting FesLastFunctionInterval to FF just remember the last mode instead of setting Fespiadefaultlastusermode to default to a specific mode?

Almaretto · 04-04-2018, 02:40 AM

Quote:

Originally Posted by 325_bucks

ah I see, well my next question is obvious, do you know if there is a list of werte values that correspond to the drive modes? Thanks for all your help, it's been very useful

Yes, they are listed in other FDL's.

Quote:

Originally Posted by 325_bucks

also does setting FesLastFunctionInterval to FF just remember the last mode instead of setting Fespiadefaultlastusermode to default to a specific mode?

No.

03-11-2018, 01:33 PM	#94
325_bucks Captain 115 Rep 835 Posts Drives: F90 M5 Competition Join Date: Jan 2013 Location: High Wycombe iTrader: (1)	Almaretto had a look at the coding today, using latest 4.10.13 psdzdata and launcher 2.8.0 and I could only see 8 ecus. BDC_Body has the cheat code for ASS but it said NA Only and didn't show any FDL in it. Is ASS memory in BDC_BODY2 or something else? I can't see any DME type ECUs. The only coding I was able to do was add tyre temperatures, I did this to make sure it worked and as I had it before, but it was the only semi useful thing I wanted that I could code. All I want now is ASS memory, chose the drive mode if possible and auto high beam on as standard. Thanks for your help or PM me if necessary, please!
	Appreciate 0 Quote

03-28-2018, 10:36 AM	#96
325_bucks Captain 115 Rep 835 Posts Drives: F90 M5 Competition Join Date: Jan 2013 Location: High Wycombe iTrader: (1)	Seems like TM has updated LP and is responding again? I hope he responds soon, I'd love to get coding
	Appreciate 0 Quote

03-29-2018, 06:51 PM	#99
paul.j.ghosh Private First Class 7 Rep 105 Posts Drives: 2019 M760i xDrive Join Date: Mar 2017 Location: El Cajon, CA iTrader: (0)	Almaretto - do you know if support for i-Step 17-11 is coming?
	Appreciate 0 Quote

04-02-2018, 09:46 AM	#101
325_bucks Captain 115 Rep 835 Posts Drives: F90 M5 Competition Join Date: Jan 2013 Location: High Wycombe iTrader: (1)	Almaretto, Managed to get LP 3.1.0. So far only managed to code ASS memory which I thought was in BDC until I remembered that’s not the case anymore. But I can’t code drive mode as BDC is not showing any information, just . for module 3221 which I think is where the drive mode settings are. My I step is 18.03.05 (I think). Is this the reason why the data is still trimmed and I can’t see your cheat codes?
	Appreciate 0 Quote

04-02-2018, 11:50 AM	#102
325_bucks Captain 115 Rep 835 Posts Drives: F90 M5 Competition Join Date: Jan 2013 Location: High Wycombe iTrader: (1)	...looking around online it seems (you've said elsewhere) that BDC_BODY2 is actually mapped in the latest Launcher Pro. But I don't see it. Any ideas?
	Appreciate 0 Quote

04-04-2018, 02:28 AM	#106
325_bucks Captain 115 Rep 835 Posts Drives: F90 M5 Competition Join Date: Jan 2013 Location: High Wycombe iTrader: (1)	Yes that's what I thought it would be too but in there I only get the option of Comfort, EcoPro or another option that's in German, I guess it's not yet mapped correctly?
	Appreciate 0 Quote

04-04-2018, 02:35 AM	#109
325_bucks Captain 115 Rep 835 Posts Drives: F90 M5 Competition Join Date: Jan 2013 Location: High Wycombe iTrader: (1)	also does setting FesLastFunctionInterval to FF just remember the last mode instead of setting Fespiadefaultlastusermode to default to a specific mode?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search