Firearms

[boba-fett]

Originally Posted by Sedan_Clan

A mentally unstable person with a weapon who was going to do harm to a person or group of people regardless. It's no different than the person/people who drive(s) their car(s) through parades, outdoor food markets, etc. with the sole intent on injuring or killing people. No guns? Use a sword. No guns? Use a knife. No guns? Use a improvised explosive device. No guns? Use a vehicle. No guns?…..get the point?

No I don't get the point at all, A readily available gun is the problem, I don't know why there is so much denial - to make an effective bomb is much harder to do, and I very much doubt a knife or sword would have killed anywhere near so many and takes fitness and close proximity.

Would you change your mind if one of the children was yours ?

[Sedan_Clan]

Originally Posted by boba-fett

No I don't get the point at all, A readily available gun is the problem, I don't know why there is so much denial - to make an effective bomb is much harder to do, and I very much doubt a knife or sword would have killed anywhere near so many and takes fitness and close proximity.

Would you change your mind if one of the children was yours ?

No!

[Dang3r]

Originally Posted by jamesinaz

From the photos the fire controls have either safe or semi. Note the difference in a fire control switch for select fire.

At the HK my screen at the smartphone was too small and I hadnt enlarged it but yes, semi.
At the last one I'd seen 2 notches below and just the red 1, wasnt sure

[boba-fett]

Originally Posted by Sedan_Clan

No!

[Lucky John]

In honor of the 45th anniversary of Star Wars. I picked up this one just last month and love it. The grip has been done just right for my hand. Not in love with that Streamlight, may have to get an Olight painted to match. I think it is really cool. When SW came out, I was fourteen and can still remember standing in line for up to four hours to get to see it. The true definition of a Block Buster.

[Sedan_Clan]

Originally Posted by Lucky John

In honor of the 45th anniversary of Star Wars. I picked up this one just last month and love it. The grip has been done just right for my hand. Not in love with that Streamlight, may have to get an Olight painted to match. I think it is really cool. When SW came out, I was fourteen and can still remember standing in line for up to four hours to get to see it. The true definition of a Block Buster.

[IMG]https://www.xbimmers.com/forums/pict...ictureid=85263[/IMG]

Beautiful!!!!

[paquet]

Originally Posted by Sedan_Clan

Speaking of 9mm……


….As many here know, I build AR's for many of my friends and co-workers. I have built a zillion .223/5.56/300 BLK AR's, but this is the first AR9 I've built. It turned out well based on the specs/parts list he provided. For this particular build he already had a lower designed for .223/5.56/300 BLK, so I had to use the Stern Defense adapter to convert it for 9mm use. I also removed the weight from the 9mm BCG so the Law Tactical folder could be used.

I feel tempted to build an AR9 now….

[Sedan_Clan]

Originally Posted by packet

I feel tempted to build an AR9 now….

You could even just build an AR9 upper and buy the Stern Defense adapter, then put it on an AR you already own. It would take all of 5-10 mins to convert one of your current AR's to 9mm.

[Pablo Chacon]

I’m going AR shopping today, it just feels like the right thing to do.

[EezyBeezy]

Speaking of AR-9’s, would love a Noveske N9 because it uses & looks rad with the straight Colt mags.

[Sedan_Clan]

Originally Posted by EezyBeezy

Speaking of AR-9's, would love a Noveske N9 because it uses & looks rad with the straight Colt mags.

Any pics? I've never seen one. I like Noveske products though. I've put the Flaming Pig on a few builds.

[EezyBeezy]

Originally Posted by Sedan_Clan

Any pics? I've never seen one. I like Noveske products though. I've put the Flaming Pig on a few builds.

Looks pretty slick with the Colt mags I think.

[Sedan_Clan]

Originally Posted by EezyBeezy

Looks pretty slick with the Colt mags I think.

[IMG]https://noveske.com/wp-content/uploa...ght-scaled.jpg[/IMG]

I dig it. I love uppers with no forward assist. Slick-sides are my fave!!!

[ezaircon4jc]

Originally Posted by boba-fett

No I don't get the point at all, A readily available gun is the problem, I don't know why there is so much denial - to make an effective bomb is much harder to do, and I very much doubt a knife or sword would have killed anywhere near so many and takes fitness and close proximity.

Would you change your mind if one of the children was yours ?

That's the "danger" of living in a FREE society where we are CITIZENS and (theoretically) rule ourselves with inalienable, inherent rights and not SUBJECTS of a monarchy that delegates our privileges.

Have you read our Constitution? Bill of RIGHTS (which are really restrictions on our "elected" officials)? Federalist Papers? We even have the right, and duty, to overthrow our own government when it becomes tyrannical. Can't do that without the means, i.e. firearms.

[Monster335]

Originally Posted by Sedan_Clan

Speaking of 9mm……


….As many here know, I build AR's for many of my friends and co-workers. I have built a zillion .223/5.56/300 BLK AR's, but this is the first AR9 I've built. It turned out well based on the specs/parts list he provided. For this particular build he already had a lower designed for .223/5.56/300 BLK, so I had to use the Stern Defense adapter to convert it for 9mm use. I also removed the weight from the 9mm BCG so the Law Tactical folder could be used.

Instead of Stern adapter you could go with Endomags. I recently built 2 AR9's and one of them has ar15 lower using Endomags. Ive put lots of rounds through it and not one of them jammed.

[Sedan_Clan]

Originally Posted by ezaircon4jc

That's the "danger" of living in a FREE society where we are CITIZENS and (theoretically) rule ourselves with inalienable, inherent rights and not SUBJECTS of a monarchy that delegates our privileges.

Have you read our Constitution? Bill of RIGHTS (which are really restrictions on our "elected" officials)? Federalist Papers? We even have the right, and duty, to overthrow our own government when it becomes tyrannical. Can't do that without the means, i.e. firearms.

Preach!!!

[Fly320s]

Originally Posted by Sedan_Clan

Why would it violate any laws? They purchase their stripped lower receiver(s) legally at an FFL (…and wait the 10-day period or get a letter from their respective Captain(s) to negate the waiting period) and give them to me to build the actual rifle. There's no violation of law. It's no different than a gun shop employee building the gun for you. I can build them a higher quality product for less than a gun shop will charge.

Sorry, I wasn't clear.

I was referring to the features. Doesn't CA have a bunch of restrictions on which features ARs can have? Or does that not apply in this case?

[Sedan_Clan]

Originally Posted by Fly320s

Sorry, I wasn't clear.

I was referring to the features. Doesn't CA have a bunch of restrictions on which features ARs can have? Or does that not apply in this case?

There is some variance between registered AR-format pistols and AR rifles. The break action to remove a mag is the important thing.

[chowser51]

Love AR9s. We had some MP5s and UMPs when I first started but have since sold them all and switched to rifles.

A long time ago I built a PSA AR-9 with Colt mags and it was okay then I went and got a SIG MPX pistol


Now I'm using a CMMG Banshee SBR with Glock mags.

[paquet]

Originally Posted by Sedan_Clan

You could even just build an AR9 upper and buy the Stern Defense adapter, then put it on an AR you already own. It would take all of 5-10 mins to convert one of your current AR's to 9mm.

Looking into all that - but a dedicated AR-9 pistol that's light(er) would be nice.
Currently have one with a 223 Wylde heavy barrel - and that thing is heavy to wield. Side charger though - would prefer an ambi and maybe stick in a forward assist...though I could live without it.

[Sedan_Clan]

Originally Posted by chowser51

Love AR9s. We had some MP5s and UMPs when I first started but have since sold them all and switched to rifles.

A long time ago I built a PSA AR-9 with Colt mags and it was okay then I went and got a SIG MPX pistol
[img]https://i.postimg.cc/XJNzVc36/IMG-3844.jpg[/img]

Now I'm using a CMMG Banshee SBR with Glock mags.
[img]https://i.postimg.cc/PJFx3bpk/3-C099...3-FFA0-AC6.jpg[/img]

Ooooo I love that gray rifle.

[RnmEvo9]

I am so glad I don't live in Canada.