BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   7Post - 7 Series Forum > BIMMERPOST Universal Forums > General Automotive (non-BMW) Talk + Photos/Videos

Post Reply
 
Thread Tools Search this Thread
      06-14-2019, 12:17 PM   #1
suspenceful
Major
suspenceful's Avatar
623
Rep
1,138
Posts

Drives: 2008 135i, 2013 M-Sport X5 35i
Join Date: Feb 2014
Location: WI

iTrader: (9)

Found & Installed the Perfect 2-Post Lift in my Home Garage!

As I continue to work on my BMWs, I find myself constantly adding things to the garage to optimize my work space. Since buying the house four years ago, I transformed the 750 sq/ft garage into my ultimate hangout space. In my mind, the only thing missing was a lift. Until I found out about the MaxJax lift system. I have no affiliation with MaxJax, but everything about this lift as been great so far and I want to share my experience.



I had a tough time finding a 2-post lift that would fit in my garage with 8 ft. 7 in. (105″) garage ceilings. All of the 2-post options I found had a minimum column height of 9 ft. or 10 ft., which wouldnít fit without modifying the ceiling. I didnít want a scissor lift or a 4-post lift. Then I found the the MaxJax, which has short, portable columns.

In its highest position, the hydraulic cylinders rise up to 89″ with a lift height of 45″ (or 48″ with 3″ adapters)! This allows plenty of clearance between the columns and the ceiling, while offering 4 ft. of working space under the car. The only limitation is the height of whatever vehicle goes on the lift.



I also have a more detailed write-up on my blog that explains the most efficient installation process, with links to all of the tools and accessories that you'll need. Read it here: https://my1series.com/2019/06/13/how...e-review-mods/

Standard MaxJax Features
  • Low ceiling height friendly
  • Regular 110v electrical plug (no 220v required)
  • 6,000 lb. lifting capacity
  • Semi-portable lift columns
  • Adjustable base-plate width
  • 4″ minimum concrete required



Installation Guide & Video

The included installation guide is pretty comprehensive, but I made an in-depth video showing you how to install the lift in your home garage. I also demonstrate how to route the hoses off the ground to keep the mobile power cart out of the way.



4″ of good concrete is required to install this lift. I used the standard anchors that are included with the kit, but some people prefer the epoxy anchors instead. I mounted the columns 125″ apart from each other, measured from the inside edge. This width has allowed me to lift multiple vehicles with various jacking points.





This adjustable creeper is perfect for working under the MaxJax, since it doesnít lift high enough for you to stand under it. This short oil drain tank comes in very handy when changing oil or other fluids. Iíve used these short tripod stands when doing suspension work or to help support the car. It is the perfect lift for the at-home DIYer.



I would love to hear your thoughts and comments!
__________________
🚀 My 750HP 135i build: my1series.com
🔧 My budget 335i build: bmw335i.com
📷 Follow me on Instagram: instagram.com/jakespence
🎬 Watch me on YouTube: youtube.com/jakespence135
🏁 Shop BMW merchandise: bimmerstreet.com
Appreciate 3
Cat@IND346.50
3798j298.00

      06-14-2019, 12:26 PM   #2
Thunderguts
Second Lieutenant
167
Rep
241
Posts

Drives: 2009 128i Sport MT
Join Date: Jul 2018
Location: DFW

iTrader: (0)

Great write-up.

I'm trying to justify the price of a lift to myself (and the wife). I have a high-lift jack that will do 24" of lift. I can drop a differential by putting the car on 12" risers or tall jack stands. I don't know if I could fully drop the transmission or not, but I think I could.

My main issue is a very narrow garage that would require me to move the posts when not in use. I'm guessing it would take nearly an hour to set it up and bolt everything down once I had it installed. I just wonder how often I'm going to want to do that. If I could leave it in place, it would be a no-brainer.
Appreciate 0
      06-14-2019, 12:31 PM   #3
SFCM3
Major
United_States
887
Rep
1,413
Posts

Drives: 2011.75 E90 M3 ZCP
Join Date: Jul 2014
Location: San Francisco

iTrader: (3)

NICE GARAGE!

looks like it allows a good amount of space underneath the car to work. To me anything is better than laying on your back straining your neck to work on a car!
__________________
I am never able to post pictures on forums, all my pics are on IG @baye30 https://www.instagram.com/baye30/
Current Garage - [2011 E90 M3 ZCP] [2005 E53 X5 3.0 Sport] [1988 E30 325IS 24V]
Appreciate 0
      06-14-2019, 01:35 PM   #4
suspenceful
Major
suspenceful's Avatar
623
Rep
1,138
Posts

Drives: 2008 135i, 2013 M-Sport X5 35i
Join Date: Feb 2014
Location: WI

iTrader: (9)

Quote:
Originally Posted by Thunderguts View Post
Great write-up.

I'm trying to justify the price of a lift to myself (and the wife). I have a high-lift jack that will do 24" of lift. I can drop a differential by putting the car on 12" risers or tall jack stands. I don't know if I could fully drop the transmission or not, but I think I could.

My main issue is a very narrow garage that would require me to move the posts when not in use. I'm guessing it would take nearly an hour to set it up and bolt everything down once I had it installed. I just wonder how often I'm going to want to do that. If I could leave it in place, it would be a no-brainer.
Nice! Having a 24" lift jack is better than nothing.

I was also concerned about how much area it would take up because I have a 2 car garage, and still want to use the other stall. With the 90* fittings installed at the base of the posts and a narrow install, you'll be fine. But if you want to take them down and store them away everytime, it should only take 15 minutes to roll them out, tighten 5 bolts each, and slide on the quick-disconnect fittings. The most time consuming part of it was assembling everything, drilling the holes and setting the anchors. After that, it goes really fast.

Quote:
Originally Posted by SFCM3 View Post
NICE GARAGE!

looks like it allows a good amount of space underneath the car to work. To me anything is better than laying on your back straining your neck to work on a car!
Thanks! And that's exactly my thoughts. Some people online say it must suck because you can't stand. But honestly, the rolling sitting creeper is great and anything is better than getting on my knees, jacking it up, and then rolling around. I love it so far!
__________________
🚀 My 750HP 135i build: my1series.com
🔧 My budget 335i build: bmw335i.com
📷 Follow me on Instagram: instagram.com/jakespence
🎬 Watch me on YouTube: youtube.com/jakespence135
🏁 Shop BMW merchandise: bimmerstreet.com
Appreciate 0
      06-14-2019, 01:37 PM   #5
rice_rocket88
Private
8
Rep
66
Posts

Drives: E60 F48 F49
Join Date: Mar 2019
Location: Boston

iTrader: (0)

That looks awesome.. as does your ceiling! I had this in mind when I first moved into the new house, but was lucky enough to talk to the builder and found out that at BEST there was 4" of concrete under there, but most likely somewhere around 3 ish. I know there have been some debates about other ways to get it done right, but I honestly just didn't want to A) take the risk B) use the alternative methods and definitely not C) jackhammer and fill more.

I ended up with the quickjack which gets you pretty good height, and I can push them together and just drive over them during 99% of the time that they aren't in use which might work for thunderguts. The quickjack I think on some sale was literally like 1K for me.. which I just justified in my mind that my biggest jack was failing/leaking.. and some of the cars didn't have great lift points so I had to jack up each corner to put on jack stands. Either way it was a good splurge that has paid off multiple times. Heck, I get free beers/lunch/gifts for friends and family that use it to change winter tires over to summer and vice versa !
Appreciate 0
      06-14-2019, 03:37 PM   #6
suspenceful
Major
suspenceful's Avatar
623
Rep
1,138
Posts

Drives: 2008 135i, 2013 M-Sport X5 35i
Join Date: Feb 2014
Location: WI

iTrader: (9)

Quote:
Originally Posted by rice_rocket88 View Post
That looks awesome.. as does your ceiling! I had this in mind when I first moved into the new house, but was lucky enough to talk to the builder and found out that at BEST there was 4" of concrete under there, but most likely somewhere around 3 ish. I know there have been some debates about other ways to get it done right, but I honestly just didn't want to A) take the risk B) use the alternative methods and definitely not C) jackhammer and fill more.

I ended up with the quickjack which gets you pretty good height, and I can push them together and just drive over them during 99% of the time that they aren't in use which might work for thunderguts. The quickjack I think on some sale was literally like 1K for me.. which I just justified in my mind that my biggest jack was failing/leaking.. and some of the cars didn't have great lift points so I had to jack up each corner to put on jack stands. Either way it was a good splurge that has paid off multiple times. Heck, I get free beers/lunch/gifts for friends and family that use it to change winter tires over to summer and vice versa !
For sure! Totally understandable. I debated those, but didn't want to spend the cash unless I got significant lifting room (not be on my back). I pulled the trigger on the MaxJax when it was on sale for $1675 shipped with residential delivery, liftgate, and tax included. I didn't measure my concrete beforehand, just prayed when I drilled my first hole that it'd be deep enough.

I look forward to family and friends pestering me to use it, which I think will be okay as long as they bring beer
__________________
🚀 My 750HP 135i build: my1series.com
🔧 My budget 335i build: bmw335i.com
📷 Follow me on Instagram: instagram.com/jakespence
🎬 Watch me on YouTube: youtube.com/jakespence135
🏁 Shop BMW merchandise: bimmerstreet.com
Appreciate 0
      06-15-2019, 10:43 PM   #7
positiveions
Lieutenant General
positiveions's Avatar
Lebanon
567
Rep
11,352
Posts

Drives: 16 MKVII Golf,16 F15 X5,E36 M3
Join Date: Sep 2007
Location: Upland, CA

iTrader: (1)

Send a message via MSN to positiveions Send a message via Yahoo to positiveions
Good write up! Thanks for sharing.
Appreciate 0
      Yesterday, 12:54 AM   #8
roastbeef
Major General
roastbeef's Avatar
United_States
5278
Rep
9,166
Posts

Drives: E92 M3
Join Date: Nov 2010
Location: Orange County, CA

iTrader: (2)

tell me about that adjustable creeper.
__________________
Instagram; @roastbeefmike
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:35 AM.




7post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST